VMC 855 Three-axis vertical machining center

The VMC 855 series adopts a vertical milling center with a three-axis full linear guide. With high-speed movement, this series achieves high productivity and profitability. It is the best choice for communication, automotive, hardware and medical products. Striving for high precision and efficiency, it is the best choice for processing 3C parts and hardware due to its excellent performance in the width and depth of workpieces.

The unique structure of the lattice type large-span base and column can withstand the inertia caused by high G-acceleration. The chip removal of the machine is realized by the rear row with an optimal chip removal angle and a large-volume chip washing system.

The three-axis rapid travel is 48 meters, which greatly shortens the processing time. The large screw pitch and high-speed linear guide can reduce the wear of the linear guide and prolong its service life. It is suitable for high-speed operation and greatly reduces the required drive power of the machine. It has the characteristics of high rigidity, low noise, low friction and high sensitivity, which can improve the processing speed and precision.

Improve the design of the column, leave space for the installation of the 4th and 5th axes. The Z axis adopts the design of no counterweight and is equipped with a servo motor with brake to improve the driving performance of the Z axis, so as to achieve high speed and better surface finish.

The design of the closed protective cover, which moves smoothly at high speeds and has low noise, effectively blocks the cutting fluid and chips, so that the protection and service life of the linear guides and screw spindles can reach the best state.

Main configuration:
(1) Resin sand molds, hardened and seasoned.
(2) Taiwan HIWIN precision locking ball screw and nut;
(3) Taiwan Silver Roller Linear Guide Bar
(4) Taiwan BT40 Spindle Unit (10000rpm) with optional Central Water Discharge Ring Spray and 12000rpm Direct Link.
(5) Taiwan Support Booster Cylinder and Synchronous Pulley.
(6) Taiwan Imported NTN Bearings for Screw Bars
(7) Taiwan Three-Axis X, Y, Z Stainless Steel Guide Rail Inner Guard
(8) Taiwan Okada 24T Manipulator Disc Tool Journal Standard Configuration
(9) Equipped with Automatic Lubrication, Cooling, Spindle Air Blowing, Warning Lights, Explosion-Proof Lights, etc.
(10) Standard Configuration Full Metal Outer Guard, Economical Half Guard Optional. (11) The system is equipped with knd2000 bus system as standard and supports optional four axes. Choose from new generation, GSK, HNC, Fanuc, Siemens, Mitsubishi and other systems to customize.