Description
TCK50A Product Detail Page
| PECIFICATIONS | Units | Tck50A-500 |
|---|---|---|
| Max Swing over bed | mm | 500 |
| Max cutting length | mm | 500 |
| Standard cutting diameter | mm | 300 |
| Max cutting diameter | mm | 400 |
| Max swing over cross slide | mm | 300 |
| Spindle bore | mm | 65 |
| Spindle speed range | rpm | 50-4500 |
| Spindle nose type | - | A2-6 |
| Spindle pass bar diameter | mm | 50 |
| Turret/tool post | - | 8 station hydraulic turret |
| X axis travel | mm | 210 |
| Z axis travel | mm | 550 |
| X axis motor | kw | 2.5 |
| Z axis motor | kw | 2.5 |
| Main spindle motor | kw | 11kw |
| Hydraulic tailstock quill taper | - | MT5 |
| Hydraulic tailstock travel | mm | 350 |
| Machine weight | kg | 3650 |
| Overall dimension | mm | 2780x1980x1945mm |
1. This machine is suitable for processing all kinds of small and medium shaft and disk parts, can turn various threads, arcs, cones and the inner and outer surfaces of the rotating body. It is widely used in plumbing equipment, valves, electrical appliances, tools, automobiles and motorcycles. , bearings and other industries.
2. TCK50A is a high-speed, high-precision and reliable bevel bed machine. The main components such as bed base, bed and side box are made of high-strength materials to ensure the stability of the machine throughout the entire service life.
3. It has a 45 ° all-round inclined bed structure and is equipped with high-precision pre-loading linear guideways from Taiwan (China). The machine has high positioning accuracy, smooth chip removal, and is suitable for high-speed and high-precision processing.
4. High-speed, high-precision and rigid body type spindle unit, servo spindle motor can achieve higher spindle speed. The spindle unit is assembled in a constant temperature room. After assembly, it was run at a constant temperature for 72 hours, and then tested for 72 hours after being installed on the machine tool to ensure the reliability of speed and precision.
5. Equipped with 8-station hydraulic turret as standard, the tool replacement speed is fast and the positioning is accurate.
6. The feed in X and Z directions is realized through the servo motor, directly connected with the lead screw through the large torque of the low inertia elastic linking member. The screw support adopts pre-stretched structure, which can eliminate the transmission gap and pre-compensate for the thermal deformation of the machine tool during long-term operation. The effect on accuracy ensures the positioning and positioning repeatability; The modern centralized automatic lubrication device is adopted, timer and quantitative automatic interval lubrication, stable and reliable operation.
7. The machine pays attention to the design of edge technology, and the protection is reliable. With powerful cutting and powerful high pressure.
Reviews
There are no reviews yet.